Corken Pumps

Corken Pump
Industrial Vane Pumps
Truck loading Pumps
Multistage Side Channel Pumps
Oil Free Compressors
Stainless Steel Vane Pumps
corkpumps.gif (23753 bytes)

To visit Corkens Website on the internet please go to our Manufacturers Links Page

Advantages of Corken's Industrial Vane Pumps...

corkenpump3.jpg (8490 bytes)

Can handle small amounts of vapor
Suction lift
Self adjusting vanes
Replaceable cam (liner)
Various seal options: packed, mechanical seal, and sealless designs
Various drive options (including hydraulic)
Simple to service

Limited List of Liquids

LPG
Fuel Oils	Ammonia
Petroleums	Hydrocarbons
Gasolines	Solvents
Refrigerants	Alcohol
Ethylene Glycol	Jet and Aviation Fuel
Assorted Light Liquids or Liquefied Gases

Advantages of Corken Multistage Side Channel Pump
corkpump2.jpg (6383 bytes)

The SC-Series pump is designed for pumping applications involving high differential pressures, low NPSH conditions, and aerated liquids up to 50% gas. The high-differential pressure and self-priming capabilities are results of the multistage side-channel design. This feature incorporates one to eight stages of open radial-vane impellers and special modular side-channel casings.

Flow Range: 7.5 to 185 GPM (28.3 - 700 LPM)
Maximum Differential Head: 1150 ft (350 m)
Maximum Operating Pressure: 580 psig (40 bar)
Typical Applications: Cylinder filling, vaporizer feeding, boiler feed, aerosol and propellant transfer, bulk filling operations.

Advantages...

Many sealing options including Mag-drive.
Stainless Steel Options Available
Long Lasting
Few Wear Parts
Modular Construction
Exceptional in light liquid & Gas Transfer

Limited List of Liquids

LPG
Hydrocarbons
Fuel oils
Refrigerants
Ammonia
Boiler Feed Water
Food and Beverage Products
High Pressure Machine coolant
Fire Fighting Foam
Pharmaceutical Products
Cosmetic Products

Additional Specifications

Specifications	Model
	10	20	30	40	50	60
Number of Stages	1 to 8
Inlet Flange Inches (MM)	1-1/2 (40)	2-1/2 (65)	2-1/2 (65)	3 (80)	4 (100)	4 (100)
Outlet Flange Inches (MM)	3/4 (20)	1-1/4 (32)	1-1/4 (32)	1-1/2 (40)	2 (50)	2-1/2 (65)
RPM-50 Hz RPM-60 Hz	1450 1750	1450 1750	1450 1750	1450 1750	1450 1750	1450 1750
Maximum Working Pressure PSIG (Bar)	580 (40)	580 (40)	580 (40)	580 (40)	580 (40)	580 (40)
Differential Pressure Range PSI (Bar)	10 (.7)- 150 (10.3)	15 (1)- 230 (15.9)	10 (.7)- 180 (12.4)	10 (.7)- 175 (12.1)	10 (.7)- 210 (14.5)	10 (.7)- 250 (17.2)
Min. Temp °F (°C)	-40° (-40°)	-40° (-40°)	-40° (-40°)	-40° (-40°)	-40° (-40°)	-40° (-40°)
Max. Temp °F (°C)	428° (220°)	428° (220°)	428° (220°)	428° (220°)	428° (220°)	428° (220°)
NPSH Range FT (M)	1.6 (.5)- 13 (4)	2 (.6)- 3.3 (1)	1.6 (.5)- 6.6 (2)	1.3 (.4)- 8.2 (2.5)	1.3 (4)- 12 (3.5)	4.6 (1.4)- 8.2 (2.5)
Maximum Viscosity SSU (CST)	1050 (230)	1050 (230)	1050 (230)	1050 (230)	1050 (230)	1050 (230)
Maximum Proportion of Gas Allowable	50%	50%	50%	50%	50%	50%
DIN Flange Option	Yes	Yes	Yes	Yes	Yes	Yes
ANSI Flange Option	No	Yes	Yes	Yes	Yes	Yes
Casing Material Option	Ductile Iron (standard), Cast Iron, Stainless Steel
Impeller Material Option	Brass (standard), Steel, Stainless Steel
O-Ring Material Option	Viton® (standard), Teflon®, Ethylene-Propylene
Double Seal Option	Yes	Yes	Yes	Yes	Yes	Yes
Magnetic Drive Option	Yes	Yes	Yes	Yes	Yes	No
High Temp. Option	Yes	Yes	Yes	Yes	Yes	Yes
Internal Relief Option	No	No	No	No	No	No

Differential pressure range based on propane at 60°F/16C